Reboot and Select Proper Boot Device Issue [SOLVED] - TechCult

Reboot and Select Proper Boot Device Issue [SOLVED]

Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in  Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:

Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key

Reboot and Select Proper Boot Device Issue [SOLVED]

Method 1: Set Correct Boot Order

You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:

1.When your computer starts (Before the boot screen or the error screen), repeatedly press Delete or F1 or F2 key (Depending upon your computer’s manufacturer) to enter BIOS setup.

2.Once you are in BIOS setup select Boot tab from the list of options.

3.Now make sure that the computer Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.

4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, if not then continue.

Method 2: Check if the Hard Disk is damaged/failed

If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.

To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key and when the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option and press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.

Fix Bad Sector issues with HDD using Hiren’s Boot

Method 3: Check if Hard Disk is properly connected

In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.

Important: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.

Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.

Method 4:  Run startup/Automatic Repair

1.Insert the Windows 10 bootable installation DVD and restart your PC.

2.When prompted to Press any key to boot from CD or DVD, press any key to continue.

3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

4.On choose an option screen, click Troubleshoot.

5.On Troubleshoot screen, click Advanced option.

6.On the Advanced options screen, click Automatic Repair or Startup Repair.

7.Wait til the Windows Automatic/Startup Repairs complete.

8.Restart and you have successfully Fix Reboot and Select Proper Boot Device issue, if not, continue.

How to fix Automatic Repair couldn’t repair your PC.

Method 5: Enable UEFI Boot

1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.

2.The make the following changes:

3.Next, tap F10 to Save and Exit the boot setup.

Method 6: Change the Active Partition in Windows

1.Again open cmd using Windows installation disk.

2.Type the following command into cmd and hit enter after each one:

Note: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.

3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.

How to fix BOOTMGR is missing Windows 10

Method 7: Repair Install Windows 10

Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).

That’s it you have successfully Fix Reboot and Select proper Boot device issue but if you still have any queries regarding this post feel free to ask them in the comment’s section.