Fix USB Device not Recognized Error Code 43 - TechCult

Fix USB Device not Recognized Error Code 43

Fix USB Device not Recognized Error Code 43: The error message “USB Device not Recognized Error Code 43” in the device manager can occur if the USB hardware or the driver fails. The error Code 43 means the device manager has stopped USB device because the hardware or the driver have reported to Windows that it has some kind of issue. You will see this error message in Device Manager when the USB Device is not recognized:

When you get the above error message then it’s because one of the drivers of the USB controlling the USB device have notified the Windows that the device failed in some manner and that’s why it needs to be stopped. There is no single cause to why this error is occurring because this error can also occur because of corruption of the USB drivers or drivers cache simply need to be flushed.

You will get the following error message depending on your PC:

  • USB Device not recognized
  • Unrecognized USB device in Device Manager
  • USB Device driver software was not successfully installed
  • Windows has stopped this device because it has reported problems.(Code 43)
  • Windows can’t stop your “Generic volume” device because a program is still using it.
  • One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.

Fix USB Device not Recognized Error Code 43

It’s recommended to create a restore point just in case something goes wrong.

Few of the simple fixes which you may try:

1.A simple restart might be helpful. Just remove your USB device, restart your PC, again plug in your USB see if it works or not.

2.Disconnect all the other USB attachments restart then try to check whether USB is working or not.

3.Remove your Power supply cord, restart your PC and take out your battery for few minutes. Don’t insert the battery, first, hold the power button for few seconds then only insert the battery. Power on your PC (do not use power supply cord) then plug in your USB and it might work.
NOTE: This seems to Fix USB Device not Recognized Error Code 43 in many cases.

4.Make sure windows update is ON and your computer is up to date.

5.The problem arises because your USB device has not been properly ejected and it can be fixed merely by plugging your device into a different PC, letting it load necessary drivers on that system and then properly ejecting it. Again plug in the USB into your computer and check.

6.Use Windows Troubleshooter: Click Start then type Troubleshooting> Click configure a device under Hardware and Sound.

If the above simple fixes don’t work for you then follow these methods to successfully fix this issue:

Method 1: Update USB drivers

1.Press Windows Key + R then type “devmgmt.msc” and hit enter to open Device Manager.

2.Click on Action > Scan for hardware changes.

3.Right-click on the Problematic USB (should be marked with Yellow exclamation) then right click and click “Update Driver Software.

4.Let it search for drivers automatically from the internet.

5.Restart your PC and see if the issue is resolved or not.

6.If you are still facing USB device not recognized by Windows then do the above step for all the items present in Universal Bus Controllers.

7.From the Device Manager, right click on the USB Root Hub then click Properties and under Power Management tab uncheck “Allow the computer to turn off this device to save power.

Method 2: Uninstall USB controllers

1.Press Windows Key + R then type “devmgmt.msc” and click OK to open Device Manager.

2.In device Manager expand Universal Serial Bus controllers.

3.Plug in your USB device which is showing you an error: USB device not recognized by Windows.

4.You will see an Unknown USB device with yellow exclamation mark under Universal Serial Bus controllers.

5.Now right-click on it and click Uninstall to remove it.

6.Restart your PC and the drivers will be automatically installed.

7.Again if the issue persists repeat the above steps for each device under Universal Serial Bus controllers.

Method 3: Disable Fast Startup

1.Press Windows Key + R then type “powercfg.cpl” and hit enter to open Power Options.

2.Click on Choose what the power buttons do in the top-left column.

3.Next, click on Change settings that are currently unavailable.

4.Uncheck Turn on Fast startup under Shutdown settings.

5.Now click Save changes and Restart your PC.

This solution seems to be helpful and should Fix USB Device not Recognized Error Code 43 error easily.

Also see, Fix USB Device Not Recognized. Device Descriptor Request Failed

Method 4: Change the USB Selective Suspend Settings

1.Press Windows Key + R then type “powercfg.cpl” and hit enter to open Power Options.

2.Next, click on Change plan settings on your currently select power plan.

3.Now click Change advanced power settings.

4.Navigate to USB settings and expand it, then expand USB selective suspend settings.

5.Disable both On battery and Plugged in settings.

6.Click Apply and Restart your PC.

Method 5: Automatically diagnose and fix Windows USB problems

1.Open your web browser and enter the following URL (or click on the below link):

https://support.microsoft.com/en-in/help/17614/automatically-diagnose-and-fix-windows-usb-problems

2.When the page has finished loading, scroll down and click Download.

3.Once the file is downloaded, double-click the file to open the Windows USB troubleshooter.

4.Click next and let Windows USB Troubleshooter run.

5.IF you have any attached devices then USB Troubleshooter will ask for confirmation to eject them.

6.Check the USB device connected to your PC and click Next.

7.If the problem is found, click on Apply this fix.

8.Restart your PC.

If none of the above method work you may also try  How to Fix USB device not recognized  by Windows  or How To Fix USB Device Not Working Windows 10  to troubleshoot Error code 43.

That’s it you have successfully Fix USB Device not Recognized Error Code 43 but if you still have any queries regarding this guide please feel free to ask them in the comment’s section.

By